Execute USSD and get it's response remotely

Hi,

You can use AMI interface to get response of USSD from remotely.Here is a manul.You can refer it.
openvoxwiki.atlassian.net/wiki/display/U...m+GSM+Gateway+by+AMI

Hi,

Here are some manuals about AMI interface.You can refer to them.

www.openvox.cn/pub/misc/GSM%20Gateway/AppNote%20AMI.pdf
www.openvox.cn/pub/misc/GSM%20Gateway/Vo...ay%20API%201.0.0.pdf
openvoxwiki.atlassian.net/wiki/display/U...m+GSM+Gateway+by+AMI

Hi bristol,

You can send ussd command through asterisk AMI interface.
openvoxwiki.atlassian.net/wiki/display/UM/AppNot_AMI

Here below is USSD command Usage:
Usage: gsm send ussd <span> <message> ori|[timeout]
Send USSD on a given GSM span
Here below is an example:

Thanks a lot linda, heizi.

openvoxwiki.atlassian.net is a good wiki, but missing images is a little annoying.

Trying to get some response from AMI without success. Will post later

excuse me for a dumb question

I miss something with span numbering. If I want to send USSD from Board2-gsm2 channel what is a span number? if I use "6" the response is

Hi,

Each board only has 4 span.The span number for all boards are only from span1 to span4.
If you want to send USSD from board2 with the ip of master board,you need to change the port of AMI.
master board:5038 board2:5039 board3:5040 ...
Or you can login it with the ip of module2 directly.